MISCAR
Super Stock Rules 2012
Legal
chassis are: BSRT T2/G3/G3R, Mattel/Tyco 440 X2, Micro Speedworks T+
Slottech Panther/Panther 02/Thundercat T1/T2/T3,
Wizzard-Patriot P2/P3/Scorpion/Storm Life-Like Fast Tracker/Pro Tracker
*
1.
The
chassis must be stock, readily available, “H.O.P.R.A. Approved” and cannot
be machined, sanded or cut except to provide the
following:
A. Add body
mounts.
B. Reinforce
and/or replace pickup tabs.
C. Add
adjustable Brush tension.
D. Add axle
retainer.
2.
The
guide pin can be a stock replacement part. It may be glued in place but
shall remain in any one of the stock positions. The front axle may be
attached to the guide pin in the Life Like chassis
only.
3.
All
magnets used shall be stock or stock replacement ceramic “H.O.P.R.A.
Approved” and cannot be cut.
4. Mattel/Tyco 440 X2 traction magnets must be of
matching polarity.
5.
All
magnets shall remain in their stock location. No material or method may be
used to restrict the movement of the magnets.
6. Any flux collectors used shall be stock and
shall remain in their stock location and cannot be
modified.
7. The armature must be stock or a hot stock
production red wire with crimp/folded/welded tabs. The commutator may be
trued, epoxied, and advanced timed. Small cuts or drill marks may be made
for balancing only. No machining/cutting along the entire length or
circumference of the lams/stacks. Excessive removal of material to reduce
weight is not allowed. Minimum 5.8 ohms (measured pole to pole with
armature removed from car and checked after a 5 minute cool down period).
No de-winding, rewinding or soldered tabs.
8. Axle bushings are not allowed unless they are
stock. *
9. There are no restrictions on the armature
bushings, gears, axles, wheels and tires.
10. Electrical systems shall be stock or stock
replacement. Adjustable brush tension is allowed. Plated parts are
allowed. Shunt wires are not allowed. Electrical parts may be lightly
sanded for cleaning purposes only.
11. The use of glue shall not be allowed on the chassis or bulkheads except for the body mounts, guide pin and armature bushings.
